M8 taps 8mm x 1.25mm tap 8mmx1.25 tap M8x1.25 Metric taps

M8 taps 8mm x 1.25mm tap 8mmx1.25 taps M8x1.25 Metric tap (REDUCED from £9.22)

Now Only
STPMM08
:   kg
!
M8 x 1.25 taps = 8mm x 1.25mm tap = 8mmx1.25 taps = M8x1.25mm Metric tap Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £3.60 each by phoning us

HSS M8 taps 8mm x 1.25mm tap 8mmx1.25 tap M8x1.25 Metric taps

Now Only
HTPMM08
:   kg
!
M8 x 1.25 taps = 8mm x 1.25mm tap = 8mmx1.25 taps = M8x1.25mm Metric tap Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M8 taps 8mm x 1.25mm tap M8x1.25 Gun Nose Spoon tap

Now Only
HTSPMM12
:   kg
!
Spiral Point HSS M8 taps = 8mm x 1.25mm tap = M8x1.25 Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock