Tapping Drills HSS for Cycle 26tpi + 20tpi taps

Tapping drill for 1/4" x 26 Cycle tap Use 5.6mm straight shank Drill HSS

Now Only
HDM05.60 - 150
:   kg
!
Tapping drill for 1/4" x 26 Cycle tap Use 5.6mm straight shank Drill HSS

Tapping drill for 9/32" x 26 Cycle tap Use 6.35mm straight shank Drill HSS

Now Only
HDM06.35 - 150
:   kg
!
Tapping drill for 9/32" x 26 Cycle tap Use 6.35mm straight shank Drill HSS

Tapping drill for 5/16" x 26 Cycle tap Use 7.2mm straight shank Drill HSS

Now Only
HDM07.20 - 150
:   kg
!
Tapping drill for 5/16" x 26 Cycle tap Use 7.2mm straight shank Drill HSS

Tapping drill for 3/8" x 26 Cycle tap Use 8.7mm straight shank Drill HSS

Now Only
HDM08.70 - 150
:   kg
!
Tapping drill for 3/8" x 26 Cycle tap Use 8.7mm straight shank Drill HSS

Tapping drill for 7/16" x 26 Cycle tap Use 10.3mm straight shank Drill HSS

Now Only
HDM10.30 - 150
:   kg
!
Tapping drill for 7/16" x 26 Cycle tap Use 10.3mm straight shank Drill HSS

Tapping drill for 1/2" x 26 Cycle tap Use 11.9mm straight shank Drill HSS

Now Only
HDM11.90 - 150
:   kg
!
Tapping drill for 1/2" x 26 Cycle tap Use 11.9mm straight shank Drill HSS

Tapping drill for 9/16" x 20 Cycle tap Use 13.1mm straight shank Drill HSS

Now Only
HDTM13.10 - 200
:   kg
!
Tapping drill for 9/16" x 20 Cycle tap Use 13.1mm stright shank Drill HSS

Tapping drill for 9/16" x 20 Cycle Lefthand tap Use 13.1mm straight shank Drill HSS

Now Only
HDTM13.10 - 200
:   kg
!
Tapping drill for 9/16" x 20 Cycle Lefthand tap Use 13.1mm straight shank Drill HSS

Tapping drill for 9/16" x 26 Cycle tap Use 13.5mm straight shank Drill HSS

Now Only
HDTM13.50 - 200
:   kg
!
Tapping drill for 9/16" x 26 Cycle tap Use 13.5mm straight shank Drill HSS

Tapping drill for 5/8" x 20 Cycle tap Use 14.5mm straight shank Drill HSS

Now Only
HDTM14.50 - 200
:   kg
!
Tapping drill for 5/8" x 20 Cycle tap Use 14.5mm straight shank Drill HSS

Tapping drill for 5/8" x 26 Cycle tap Use 15mm straight shank Drill HSS

Now Only
HDTM15.00 - 200
:   kg
!
Tapping drill for 5/8" x 26 Cycle tap Use 15mm straight shank Driill HSS

Tapping drill for 3/4" x 20 Cycle tap Use 17.8mm Morse Taper Shank MTS 2 Drill HSS

Now Only
HDTM17.80 - 200
:   kg
!
200_mts_drill
Tapping drill for 3/4" x 20 Cycle tap Use 17.8mm Morse Taper Shank MTS 2 Drill HSS

Tapping drill for 3/4" x 20 Cycle tap Lefthand Use 17.8mm Morse Taper Shank MTS 2 Drill HSS

Now Only
HDTM17.80 - 200
:   kg
!
200_mts_drill
Tapping drill for 3/4" x 20 Cycle tap Lefthand Use 17.8mm Morse Taper Shank MTS 2 Drill HSS

Tapping drill for 3/4" x 26 Cycle tap Use 18.2mm Morse Taper Shank MTS 2 Drill HSS

Now Only
HDTM18.20 - 200
:   kg
!
200_mts_drill
Tapping drill for 3/4" x 26 Cycle tap Use 18.2mm Morse Taper Shank MTS 2 Drill HSS