BA taps

0BA tap 0 BA taps (REDUCED from £17.08)

Now Only
STPBA00
:   kg
!
0BA tap = 0 BA taps x 25.4tpi in taper second bottom / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 0BA tap 0 BA taps

Now Only
HTPBA00
:   kg
!
0BA tap = 0 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 0BA tap 0 BA Gun Nose Spoon taps

Now Only
HTSP00BA
:   kg
!
Spiral Point HSS 0BA tap 0 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

1BA tap 1 BA taps (REDUCED from £19.81)

Now Only
STPBA01
:   kg
!
1BA tap = 1 BA taps x 28.2tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 1BA tap 1 BA taps

Now Only
HTPBA01
:   kg
!
1BA tap = 1 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 1BA tap 1 BA Gun Nose Spoon taps

Now Only
HTSP01BA
:   kg
!
Spiral Point HSS 1BA tap 1 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

2BA tap 2 BA taps (REDUCED from £12.52)

Now Only
STPBA02
:   kg
!
2BA tap = 2 BA taps x 31.4 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 2BA tap 2 BA taps

Now Only
HTPBA02
:   kg
!
2BA tap = 2 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 2BA tap 2 BA Gun Nose Spoon taps

Now Only
HTSP02BA
:   kg
!
Spiral Point HSS 2BA tap 2 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

3BA tap 3 BA taps (REDUCED from £19.81)

Now Only
STPBA03
:   kg
!
3BA tap = 3 BA taps x 34.8 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 3BA tap 3 BA taps

Now Only
HTPBA03
:   kg
!
3BA tap = 3 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 3BA tap 3 BA Gun Nose Spoon taps

Now Only
HTSP03BA
:   kg
!
Spiral Point HSS 3BA tap 3 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

4BA tap 4 BA taps (REDUCED from £12.52)

Now Only
STPBA04
:   kg
!
4BA tap 4 BA taps x 38.5 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 4BA tap 4 BA taps

Now Only
HTPBA04
:   kg
!
4BA tap = 4 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 4BA tap 4 BA Gun Nose Spoon taps

Now Only
HTSP04BA
:   kg
!
Spiral Point HSS 4BA tap 4 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

5BA tap 5 BA taps (REDUCED from £15.03)

Now Only
STPBA05
:   kg
!
5BA tap = 5 BA taps x 43.0 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 5BA tap 5 BA taps

Now Only
HTPBA05
:   kg
!
5BA tap = 5 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 5BA tap 5 BA Gun Nose Spoon taps

Now Only
STSP05BA
:   kg
!
Spiral Point HSS 5BA tap 5 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

6BA tap 6 BA taps (REDUCED from £14.50)

Now Only
STPBA06
:   kg
!
6BA tap 6 BA taps x 47.9 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 6BA tap 6 BA taps

Now Only
HTPBA06
:   kg
!
6BA tap = 6 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 6BA tap 6 BA Gun Nose Spoon taps

Now Only
HTSP06BA
:   kg
!
Spiral Point HSS 6BA tap 6 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

7 BA tap 7 BA taps (REDUCED from £28.86)

Now Only
STPBA07
:   kg
!
7BA tap = 7 BA taps x 52.9 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 7 BA tap 7 BA taps

Now Only
HTPBA07
:   kg
!
7BA tap = 7 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 7BA tap 7 BA Gun Nose Spoon taps

Now Only
HTSP07BA
:   kg
!
Spiral Point HSS 7BA tap 7 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

8BA tap 8 BA taps (REDUCED from £25.72)

Now Only
STPBA08
:   kg
!
8BA tap = 8 BA taps x 59.1 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 8BA tap 8 BA taps

Now Only
HTPBA08
:   kg
!
8BA tap = 8 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 8BA tap 8 BA Gun Nose Spoon taps

Now Only
HTSP08BA
:   kg
!
Spiral Point HSS 8BA tap 8 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

9BA tap 9 BA taps (REDUCED from £44.59)

Now Only
STPBA09
:   kg
!
9BA tap = 9 BA taps x 65.1 tpi in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS, cuts even into most stainless steel). All in stock

HSS 9BA tap 9 BA taps

Now Only
HTPBA09
:   kg
!
9BA tap = 9 BA taps made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS 9BA tap 9 BA Gun Nose Spoon taps

Now Only
HTSP09BA
:   kg
!
Spiral Point HSS 9BA tap 9 BA Gun Nose Spoon taps pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock