Metric taps

M0.8 x 0.19 taps 0.8x.19mm tap .8mm (REDUCED from £128.40)

Now Only
STPMM0.8x.19
:   kg
!
M0.8 x 0.19 taps = 0.8x0.19mm tap or .8mm = 16BA made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) all in stock

M0.9 x .21 taps 0.9x.21mm tap .9mm (REDUCED from £128.40)

Now Only
STPMM0.9x.21
:   kg
!
0.9mm tap = 0.9x.21mm tap or .9mm = 15BA made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) all in stock

M1 x 0.25 taps 1x.25mm tap 1mm (REDUCED from £118.30)

Now Only
STPMM01x.25
:   kg
!
M1 x 0.25 taps = 1x.25mm tap or 1mm = 14BA made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) all in stock

M1.2 x 0.25 taps 1.2x0.25mm tap 1.2mm (REDUCED from £94.26)

Now Only
STPMM01.2x.25
:   kg
!
M1.2 x 0.25 taps = 1.2x.25mm tap or 1.2mm = 13BA made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) all in stock

M1.4 x 0.3 taps 1.4x.3mm tap 1.4mm (REDUCED from £94.26)

Now Only
STPMM01.4x.3
:   kg
!
M1.4 x 0.3 taps = 1.4x.3mm tap = 1.4mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) all in stock

M1.6 x 0.35 taps 1.6x.35mm tap 1.6mm (REDUCED from £94.26)

Now Only
STPMM01.6x.35
:   kg
!
M1.6 x 0.35 taps = 1.6x.35mm tap = 1.6mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into stainless steel All in stock

M1.8 x 0.35 taps 1.8x.35mm tap 1.8mm (REDUCED from £94.26)

Now Only
STPMM01.8x.35
:   kg
!
M1.8 x 0.35 taps = 1.8x.35mm tap or 1.8mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) All in stock

M2 x 0.4 taps 2x.4mm tap 2mm (REDUCED from £16.05)

Now Only
STPMM02
:   kg
!
M2 x 0.4 taps = 2x0.4mm tap or 2mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M2 x 0.45 taps 2x.45mm tap (REDUCED from £41.50)

Now Only
STPMM02x.45
:   kg
!
M2 x 0.45 taps = 2x.45mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M2.2 x 0.45 taps 2.2x.45mm 2.2mm (REDUCED from £41.50)

Now Only
STPMM02.2x.45
:   kg
!
M2.2 x 0.45 taps = 2.2x.45mm tap or 2.2mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M2.3 x 0.4 taps 2.3x.4mm tap 2.3mm (REDUCED from £41.50)

Now Only
STPMM02.3x.4
:   kg
!
M2.3 x 0.4 taps = 2.3x.4mm tap or 2.3mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into stainless steel All in stock

M2.5 x 0.45 taps 2.5x.45mm tap 2.5mm (REDUCED from £16.05)

Now Only
STPMM02.5
:   kg
!
M2.5 x 0.45 taps = 2.5x.45mm tap or 2.5mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M2.6 x 0.45 taps 2.6x.45mm tap 2.6mm (REDUCED from £41.50)

Now Only
STPMM02.6x.45
:   kg
!
M2.6 x 0.45 taps = 2.6x.45mm tap or 2.6mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M3 x 0.35 taps 3x.35mm tap (REDUCED from £41.50)

Now Only
STMMM03x.35
:   kg
!
M3 x 0.35 taps = 3x0.35mm tap or 3x.35mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M3 x 0.5 taps 3x.5mm tap 3mm (REDUCED from £8.48)

Now Only
STPMM03
:   kg
!
M3 x 0.5 taps = 3x0.5mm tap or 3mm Standard made in taper second bottom / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £2.40 each by phoning us

HSS M3 x 0.5 taps 3x.5mm tap 3mm

Now Only
HTPMM03
:   kg
!
M3 x 0.5 taps = 3x0.5mm tap or 3mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M3 x .5 taps 3x.5mm 3mm Gun Nose Spoon tap

Now Only
HTSPMM03
:   kg
!
Spiral Point HSS M3 x .5 taps = 3x.5mm = 3mm Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M3 x 0.6 taps 3x.6mm tap (REDUCED from £41.50)

Now Only
STPMM03x.6
:   kg
!
M3 x 0.6 taps = 3x0.6mm tap = 3x.6mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M3.5 x 0.6 taps 3.5x.6mm tap 3.5mm (REDUCED from £9.74)

Now Only
STPMM03.5
:   kg
!
M3.5 x 0.6 taps = 3.5x0.6mm tap Standard or 3.5mm made in taper second bottom / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £2.40 each by phoning us

HSS M3.5 x 0.6 taps 3.5x.6mm tap 3.5mm

Now Only
HTPMM03.5
:   kg
!
M3.5 x 0.6 taps = 3.5x0.6mm tap or 3.5mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M4 x 0.7 taps 4x.7mm tap 4mm (REDUCED from £7.65)

Now Only
STPMM04
:   kg
!
M4 x 0.7 taps = 4x0.7mm tap or 4mm Standard made in taper second bottom / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £2.40 each by phoning us

HSS M4 x 0.7 taps 4x.7mm tap 4mm

Now Only
HTPMM04
:   kg
!
M4 x 0.7 taps = 4x0.7mm tap or 4mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M4 x .7 taps 4x.7mm 4mm Gun Nose Spoon tap

Now Only
HTSPMM04
:   kg
!
Spiral Point HSS M4 x .7 taps = 4x.7mm = 4mm Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M4 x 0.5 taps 4x.5mm tap (REDUCED from £41.50)

Now Only
STPMM04x.5
:   kg
!
M4 x 0.5 taps = 4x.5mm tap or 4x.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M4 x 0.75 taps 4x.75mm tap (REDUCED £41.50)

Now Only
STPMM04x.75
:   kg
!
M4 x 0.75 taps = 4x.75mm tap or 4x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M4.5 x 0.5 taps 4.5x.5mm tap (REDUCED from £65.00)

Now Only
STPMM04.5x.5
:   kg
!
M4.5 x 0.5 taps = 4.5x.5mm tap or 4.5x0.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M4.5 x 0.75 taps 4.5x.75mm tap 4.5mm (REDUCED from £45.00)

Now Only
STPMM04.5x.75
:   kg
!
M4.5 x 0.75 taps = 4.5x.75mm tap or 4.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS)  cuts into most stainless steel All in stock

M5 x 0.5 taps 5x.5mm tap (REDUCED from £41.50)

Now Only
STPMM05x.5
:   kg
!
M5 x 0.5 taps = 5x.5mm tap or 5x0.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel aAl in stock

M5 x 0.75 taps 5x.75mm tap (REDUCED from £41.50)

Now Only
STPMM05x.75
:   kg
!
M5 x 0.75 taps = 5x.75mm tap or 5x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M5 x .8 taps 5x.8mm tap 5mm (REDUCED from £8.82)

Now Only
STPMM05
:   kg
!
M5 x .8 taps = 5x.8mm tap or 5mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel all in stock - BUY 36pcs @ £2.40 each by phoning us